Power Distribution & Controls
The power distribution, circuit protection and electrical control solutions are the foundation upon which automation system are built. Space, cost and flexibility are driving factors when it comes to the selection of these components. PCC offers a comprehensive power distribution & controls solutions offering from Siemens, Carlo Gavazzi, LS Electric, Meltric, Mersen, Micron, Molex (Brad Harrison, PR Electronics, Woodhead, SST), Remke, Rex Power, Socomec, Springer, TELE, and Weidmueller.
Our product solutions are comprised of circuit breakers, contactors/overloads, limit switches, relays MSPs, power supplies, foot switches, pedant stations, joy sticks, push buttons/pilot devices, soft starters, solid state relays & contactors, stack lights, timers/counters and UPS.
For more information PCC’s Power Distribution & Controls product lines, contact us at technical@pccweb.com or call (262) 251-3000.
Power Distribution & Control News
Are you performing Lockout/Tagout (LOTO) safely? | Straight to the Point
Performing Lockout/Tagout (LOTO) safely requires the answer to one question; is there voltage? NFPA 70E/CSAZ462 requires an absence of voltage test to verify an electrically safe work condition. The traditional process poses arc flash and shock hazards to comply with NFPA 70E Article 120.5: Process for Establishing and Verifying an Electrically Safe Work Condition.
Explosion Proof LED Stack Lights | PCC’s Straight to the Point
Qlight’s Explosion Proof Stack lights are available with either IECEX or ATEX approvals for use in Zone 1, 2, 21, and 22 areas.
SIMATIC Drive Controller – Two Systems, One Device
The new SIMATIC Drive Controller saves space by combining a safety PLC, motion controller and drive control in a single device.
SIDOOR Automatic Door Controls
The SIDOOR solution from Siemens is easy to install/setup/maintain and increases operator safety. Check out this video where Rich and Dan discuss these advantages in more detail.
Whitepaper: Securing Industrial Control Systems
This whitepaper focuses on the securing industrial control systems. It covers both the challenges and common sense associated with security.
Changes in Overcurrent and Surge Protection – New 2017 NEC Code
Ready to Learn More About the Latest NEC Code Changes? This whitepaper will help expand your knowledge of standards and codes and the recent changes to the NEC 2017 Code.
Motor Plugs Simplify Motor Change-outs and Reduce Costs
Switch-rated Motor Plugs and receptacles are the safest and most cost effective solution for connecting motors and other electrical equipment because when you buy a Motor Plug and receptacle you are effectively getting a disconnect switch for free.
MELTRIC Switch-Rated Plugs & Receptacles Make Lockout/Tagout Easy
MELTRIC Corporation’s switch-rated plugs & receptacles facilitate lockout/tagout of electrical equipment. Only a lock and tag are needed to ensure that a MELTRIC plug is properly locked out and tagged out – no additional mechanisms are required.
Siemens Sirius Modular Systems
Functionalities which cover a wide range of applications - combined with consultation, technical support, and application know-how. The SIRIUS modular system includes the portfolio for industrial control engineering for switching, protecting, monitoring, and starting...