BEGIN:VCALENDAR VERSION:2.0 PRODID:-//PCC A GCG Company - WI Siemens Distributor - ECPv6.15.17.1//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:PCC A GCG Company - WI Siemens Distributor X-ORIGINAL-URL:https://www.pccweb.com X-WR-CALDESC:Events for PCC A GCG Company - WI Siemens Distributor REFRESH-INTERVAL;VALUE=DURATION:PT1H X-Robots-Tag:noindex X-PUBLISHED-TTL:PT1H BEGIN:VTIMEZONE TZID:America/Chicago BEGIN:DAYLIGHT TZOFFSETFROM:-0600 TZOFFSETTO:-0500 TZNAME:CDT DTSTART:20230312T080000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0500 TZOFFSETTO:-0600 TZNAME:CST DTSTART:20231105T070000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0600 TZOFFSETTO:-0500 TZNAME:CDT DTSTART:20240310T080000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0500 TZOFFSETTO:-0600 TZNAME:CST DTSTART:20241103T070000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0600 TZOFFSETTO:-0500 TZNAME:CDT DTSTART:20250309T080000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0500 TZOFFSETTO:-0600 TZNAME:CST DTSTART:20251102T070000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0600 TZOFFSETTO:-0500 TZNAME:CDT DTSTART:20260308T080000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0500 TZOFFSETTO:-0600 TZNAME:CST DTSTART:20261101T070000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=America/Chicago:20251118T090000 DTEND;TZID=America/Chicago:20251118T120000 DTSTAMP:20260406T093242 CREATED:20250210T201859Z LAST-MODIFIED:20250211T163143Z UID:10000377-1763456400-1763467200@www.pccweb.com SUMMARY:WinCC Unified Test Drive DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis event will allow you to take WinCC Unified HMI for a test drive. Explore the features of the new HMI hardware and software in a guided hands-on workshop. \nTopics: \n\nWinCC HMI Hardware and Software overview\nScreen development\nAlarming\nJavaScript\nSystem diagnostics control\nJumpstart your development\n\nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n Register Here URL:https://www.pccweb.com/event/wincc-unified-test-drive-3/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20251111T083000 DTEND;TZID=America/Chicago:20251113T163000 DTSTAMP:20260406T093242 CREATED:20241205T193908Z LAST-MODIFIED:20241205T193908Z UID:10000374-1762849800-1763051400@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-34/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20251028T083000 DTEND;TZID=America/Chicago:20251030T163000 DTSTAMP:20260406T093242 CREATED:20241205T185717Z LAST-MODIFIED:20241205T190246Z UID:10000365-1761640200-1761841800@www.pccweb.com SUMMARY:Siemens Step 7 Classic for Maintenance Personnel DESCRIPTION:Event Information\n  \n \n \n \n \n \n \n \n \n \n \n \nDescription\nThis three day course assumes the student has a very basic understanding of PLCs and will introduce students to the Step 7 software package\, used to program and maintain the S7-300/400 PLC systems. The class focuses on maintaining & troubleshooting the S7 PLC using Step 7. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \n Cost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nS7 Hardware Installation & Maintenance\nRemote I/O Installation & Maintenance\nUsing Simatic Manager\nEditing/Adding Symbols to a Project\nViewing the S7 PLCs Integrated Web Server\nOverview of PROFIBUS & PROFINET Networks\nUsing a Variable Table for Troubleshooting\nOverview of S7 Addressing\nWhy Various Programming Methods Are Used (Linear\, Partitioned\, Structured)\nBasics of Organization Blocks\nBasics of Functions (FC) & Function Blocks (FB)\nBasics of Data Blocks\nMonitoring PLC Program Blocks\nOverview of Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nOverview of IEC Functions & Function Blocks\nWhat Are Libraries Used For\nRewiring a User Program\nComparing Programs\nUsing Cross Reference\, Usage Table & Program Structure Tools\nTroubleshooting a S7 PLC Using LEDs\nTroubleshooting a S7 PLC Using Step 7\nTroubleshooting a S7 PLC Using the Integrated Web Server\nHow to Force a Value\nDocumenting\, Saving & Archiving Projects\n\nPrerequisite: Basic Understanding of PLCs \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-step-7-classic-for-maintenance-personnel-15/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20251007T083000 DTEND;TZID=America/Chicago:20251008T163000 DTSTAMP:20260406T093242 CREATED:20241205T191613Z LAST-MODIFIED:20241205T192157Z UID:10000368-1759825800-1759941000@www.pccweb.com SUMMARY:Siemens HMI with WinCC Unified DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal WinCC Unified software. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWinCC Unified HMI System Overview\nSiemens HMI Panel Overview\nProject Creation\nCommunication Setup\nGraphics Design\nLibrary Utilization\nAlarm System\nTag Logging\nRecipe Management\nUser Administration\nScripting\nCross Reference\nMulti-Language Setup\nProject Transfer\nTIA Portal Step 7 Integration\n\nPrerequisite: None \n  \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Register Here\n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC's staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-hmi-with-wincc-unified-11/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250805T090000 DTEND;TZID=America/Chicago:20250805T120000 DTSTAMP:20260406T093242 CREATED:20250210T200734Z LAST-MODIFIED:20250211T163103Z UID:10000375-1754384400-1754395200@www.pccweb.com SUMMARY:WinCC Unified Test Drive DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis event will allow you to take WinCC Unified HMI for a test drive. Explore the features of the new HMI hardware and software in a guided hands-on workshop. \nTopics: \n\nWinCC HMI Hardware and Software overview\nScreen development\nAlarming\nJavaScript\nSystem diagnostics control\nJumpstart your development\n\nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n Register Here URL:https://www.pccweb.com/event/wincc-unified-test-drive/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250722T083000 DTEND;TZID=America/Chicago:20250724T163000 DTSTAMP:20260406T093242 CREATED:20241205T193450Z LAST-MODIFIED:20241205T193450Z UID:10000372-1753173000-1753374600@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-32/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250708T090000 DTEND;TZID=America/Chicago:20250708T120000 DTSTAMP:20260406T093242 CREATED:20250210T202539Z LAST-MODIFIED:20250211T163515Z UID:10000379-1751965200-1751976000@www.pccweb.com SUMMARY:Programming with Structured Control Language (SCL) DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nLearn about programming with SCL and how you can mix with typical ladder logic in Siemens TIA Portal for S7-1200/1500 PLC’s. The SCL language is very powerful and well suited for complex math operations\, data handling with arrays and string processing. SCL is a high-level text-based language that is easy to understand and provides many benefits over traditional ladder programming. This event will provide the foundation for you to start programming in SCL in a guided hands-on workshop. \nTopics: \n\nSCL Language Overview\nDevelopment\nUse Cases\nDebugging\n\nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n Register Here URL:https://www.pccweb.com/event/programming-with-structured-control-language-scl/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250520T083000 DTEND;TZID=America/Chicago:20250522T163000 DTSTAMP:20260406T093242 CREATED:20241205T193344Z LAST-MODIFIED:20241205T193344Z UID:10000371-1747729800-1747931400@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-31/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250422T090000 DTEND;TZID=America/Chicago:20250422T120000 DTSTAMP:20260406T093242 CREATED:20250210T203315Z LAST-MODIFIED:20250211T163259Z UID:10000381-1745312400-1745323200@www.pccweb.com SUMMARY:Introduction to Siemens TIA Portal PLC/HMI DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis event will allow you to take Siemens S7-1500 PLC and Siemens HMI for a test drive. Explore the features of the Siemens PLC/HMI in a guided hands-on workshop using TIA Portal STEP 7 and WinCC Unified software. \nTopics: \n\nS7-1200/1500 Automation System overview\nTIA Portal Programming environment\nIntegrate Siemens Unified Comfort Panel\nExperience the benefits of a Totally Integrated Automation System\n\nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n Register Here URL:https://www.pccweb.com/event/introduction-to-siemens-tia-portal-plc-hmi/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250408T083000 DTEND;TZID=America/Chicago:20250410T163000 DTSTAMP:20260406T093242 CREATED:20241204T192521Z LAST-MODIFIED:20241205T185435Z UID:10000361-1744101000-1744302600@www.pccweb.com SUMMARY:Siemens Step 7 Classic for Maintenance Personnel DESCRIPTION:Event Information\n  \n \n \n \n \n \n \n \n \n \n \n \nDescription\nThis three day course assumes the student has a very basic understanding of PLCs and will introduce students to the Step 7 software package\, used to program and maintain the S7-300/400 PLC systems. The class focuses on maintaining & troubleshooting the S7 PLC using Step 7. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \n Cost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nS7 Hardware Installation & Maintenance\nRemote I/O Installation & Maintenance\nUsing Simatic Manager\nEditing/Adding Symbols to a Project\nViewing the S7 PLCs Integrated Web Server\nOverview of PROFIBUS & PROFINET Networks\nUsing a Variable Table for Troubleshooting\nOverview of S7 Addressing\nWhy Various Programming Methods Are Used (Linear\, Partitioned\, Structured)\nBasics of Organization Blocks\nBasics of Functions (FC) & Function Blocks (FB)\nBasics of Data Blocks\nMonitoring PLC Program Blocks\nOverview of Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nOverview of IEC Functions & Function Blocks\nWhat Are Libraries Used For\nRewiring a User Program\nComparing Programs\nUsing Cross Reference\, Usage Table & Program Structure Tools\nTroubleshooting a S7 PLC Using LEDs\nTroubleshooting a S7 PLC Using Step 7\nTroubleshooting a S7 PLC Using the Integrated Web Server\nHow to Force a Value\nDocumenting\, Saving & Archiving Projects\n\nPrerequisite: Basic Understanding of PLCs \n \n \n \n \n \n \n Register Here\n \n  \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-step-7-classic-for-maintenance-personnel-13/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250318T090000 DTEND;TZID=America/Chicago:20250318T120000 DTSTAMP:20260406T093242 CREATED:20250224T171345Z LAST-MODIFIED:20250224T181323Z UID:10000383-1742288400-1742299200@www.pccweb.com SUMMARY:Rockwell Logix PLC to Siemens VFD Workshop DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nIn order to respond to constant competitive pressures manufacturers are always looking for an edge when it comes to cost and performance. One example of this is maintaining their existing Rockwell Logix PLC and associated code but upgrading the variable frequency drive to a best-in-class Siemens VFD like the G120. In this workshop you will learn how easy you can integrate a Siemens SINAMICS G120 into your Rockwell Logix control architecture. \nThe following topics will be covered during the workshop: \n\nOverview of the SINAMICS low-voltage drives family\nSelection and configuration tools\nIntegration tools for connecting Siemens drives to Rockwell Automation controllers\nMigration solutions for integrating new Siemens drives with discontinued Rockwell Automation controllers (PLC-5 and SLC 500) on AB Remote I/O and DeviceNet\n\nDuring the hands-on portion\, participants will: \n\nCommission a SINAMICS G120 variable frequency drive\nControl a SINAMICS G120 drive with a CompactLogix PLC on EtherNet/IP™ using Studio 5000\n\nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n Register Here URL:https://www.pccweb.com/event/rockwell-logix-plc-to-siemens-vfd-workshop/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250225T083000 DTEND;TZID=America/Chicago:20250226T163000 DTSTAMP:20260406T093242 CREATED:20241205T190547Z LAST-MODIFIED:20241205T192014Z UID:10000366-1740472200-1740587400@www.pccweb.com SUMMARY:Siemens HMI with WinCC Unified DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal WinCC Unified software. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWinCC Unified HMI System Overview\nSiemens HMI Panel Overview\nProject Creation\nCommunication Setup\nGraphics Design\nLibrary Utilization\nAlarm System\nTag Logging\nRecipe Management\nUser Administration\nScripting\nCross Reference\nMulti-Language Setup\nProject Transfer\nTIA Portal Step 7 Integration\n\nPrerequisite: None \n  \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC's staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-hmi-with-wincc-unified-9/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20250128T083000 DTEND;TZID=America/Chicago:20250130T163000 DTSTAMP:20260406T093242 CREATED:20241205T192753Z LAST-MODIFIED:20241205T192753Z UID:10000369-1738053000-1738254600@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n Register Here\n   \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-29/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20241203T090000 DTEND;TZID=America/Chicago:20241203T120000 DTSTAMP:20260406T093242 CREATED:20231207T222333Z LAST-MODIFIED:20240116T195700Z UID:10000354-1733216400-1733227200@www.pccweb.com SUMMARY:Introduction to Siemens TIA Portal PLC/HMI first time users Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis Seminar will allow you to take Siemens PLC and HMI for a test drive. Explore the features of the Siemens PLC and HMI in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/introduction-to-siemens-tia-portal-plc-hmi-first-time-users-hands-on-13/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20241107T090000 DTEND;TZID=America/Chicago:20241107T120000 DTSTAMP:20260406T093242 CREATED:20231207T221241Z LAST-MODIFIED:20241204T191239Z UID:10000349-1730970000-1730980800@www.pccweb.com SUMMARY:WinCC Unified Test Drive Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis seminar will allow you to take WinCC Unified HMI for a test drive. Explore the features of the new HMI hardware and software in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/wincc-unified-test-drive-hands-on-10/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20241105T083000 DTEND;TZID=America/Chicago:20241106T163000 DTSTAMP:20260406T093243 CREATED:20231129T221959Z LAST-MODIFIED:20240117T181418Z UID:10000344-1730795400-1730910600@www.pccweb.com SUMMARY:Siemens S7-1500 Safety with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal software & Safety PLCs. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWhy Safety\nMachine Safety Standards Overview\nPROFIsafe\nSafety Controllers\nSafety I/O Systems\nSafety Hardware Configuration\nSafety Administration\nSafety Programming & Tags\nReintegration After Error\n\nSafety Instructions\nE-Stop\nFeedback Monitoring\nWorking with Safety Door Switches\n\n\nData Transfer Between Safety & Standard Program\nFail-safe Communications Between Processors\nCalculating Response Time\nTesting & Diagnostics\n\nPrerequisite: PCC Class: Siemens S7-1500 Programming with TIA Portal or equivalent Siemens course \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-safety-with-tia-portal-2/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20241022T083000 DTEND;TZID=America/Chicago:20241024T163000 DTSTAMP:20260406T093243 CREATED:20231130T213633Z LAST-MODIFIED:20241205T145049Z UID:10000345-1729585800-1729787400@www.pccweb.com SUMMARY:Siemens Step 7 Classic for Maintenance Personnel DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis three day course assumes the student has a very basic understanding of PLCs and will introduce students to the Step 7 software package\, used to program and maintain the S7-300/400 PLC systems. The class focuses on maintaining & troubleshooting the S7 PLC using Step 7. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nTopics: \n\nS7 Family Hardware Overview\nS7 Hardware Installation & Maintenance\nRemote I/O Installation & Maintenance\nUsing Simatic Manager\nEditing/Adding Symbols to a Project\nViewing the S7 PLCs Integrated Web Server\nOverview of PROFIBUS & PROFINET Networks\nUsing a Variable Table for Troubleshooting\nOverview of S7 Addressing\nWhy Various Programming Methods Are Used (Linear\, Partitioned\, Structured)\nBasics of Organization Blocks\nBasics of Functions (FC) & Function Blocks (FB)\nBasics of Data Blocks\nMonitoring PLC Program Blocks\nOverview of Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nOverview of IEC Functions & Function Blocks\nWhat Are Libraries Used For\nRewiring a User Program\nComparing Programs\nUsing Cross Reference\, Usage Table & Program Structure Tools\nTroubleshooting a S7 PLC Using LEDs\nTroubleshooting a S7 PLC Using Step 7\nTroubleshooting a S7 PLC Using the Integrated Web Server\nHow to Force a Value\nDocumenting\, Saving & Archiving Projects\n\nPrerequisite: Basic Understanding of PLCs \n\n\n \n \n \n \n \n Attendee InfoName*\n \n \n \n First\n \n \n \n \n Last\n \n \n Company*Phone*Email*\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Δ \n \n \n \n \n \n \n \n \n \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-step-7-classic-for-maintenance-personnel-12/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20241015T090000 DTEND;TZID=America/Chicago:20241015T120000 DTSTAMP:20260406T093243 CREATED:20231212T035641Z LAST-MODIFIED:20240924T191902Z UID:10000355-1728982800-1728993600@www.pccweb.com SUMMARY:SINAMICS G120X Hands-On: Simplifying Industrial Drives DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nSiemens recently launched the SINAMICS G120X drive\, targeting pump\, fan\, and compressor applications in industries like water/wastewater\, and HVAC/R. This user-friendly drive promises seamless integration\, cost optimization\, and resource-efficient operation\, ultimately cutting down on total ownership costs. This hands-on workshop introduces the addition to the SINAMICS portfolio\, highlighting its hardware\, software features\, and functions\, aiming to simplify and optimize solutions for various applications. Attendees see firsthand its ease of setup and programming through an intuitive operator panel and optional Wi-Fi module. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/sinamics-g120x-hands-on-simplifying-industrial-drives/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240917T083000 DTEND;TZID=America/Chicago:20240918T163000 DTSTAMP:20260406T093243 CREATED:20231129T213149Z LAST-MODIFIED:20240117T175130Z UID:10000281-1726561800-1726677000@www.pccweb.com SUMMARY:Siemens HMI with WinCC Unified DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal WinCC Unified software. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWinCC Unified HMI System Overview\nSiemens HMI Panel Overview\nProject Creation\nCommunication Setup\nGraphics Design\nLibrary Utilization\nAlarm System\nTag Logging\nRecipe Management\nUser Administration\nScripting\nCross Reference\nMulti-Language Setup\nProject Transfer\nTIA Portal Step 7 Integration\n\nPrerequisite: None \nPart # PCC-TRN-SCH2-WUNI \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-hmi-with-wincc-unified-8/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240820T090000 DTEND;TZID=America/Chicago:20240820T120000 DTSTAMP:20260406T093243 CREATED:20240417T155053Z LAST-MODIFIED:20240417T155059Z UID:10000358-1724144400-1724155200@www.pccweb.com SUMMARY:PLC Based Motion Control DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis hands-on class will allow users to configure and commission a motion control application using a Siemens S7-1500 PLC with a Siemens S210 drive. \nTopics: \nOverview of PLC based motion \nConfiguration of Servo Drive system for motion control \nHardware setup in TIA Portal V19 \nOverview of Technology Objects \nProgramming of basic motion control functions using Siemens LAxisCtrl Function Blocks \n  \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/plc-based-motion-control-2/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240723T083000 DTEND;TZID=America/Chicago:20240725T163000 DTSTAMP:20260406T093243 CREATED:20231129T215930Z LAST-MODIFIED:20240117T174852Z UID:10000339-1721723400-1721925000@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-27/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240717T090000 DTEND;TZID=America/Chicago:20240717T120000 DTSTAMP:20260406T093243 CREATED:20231207T221724Z LAST-MODIFIED:20240709T155324Z UID:10000351-1721206800-1721217600@www.pccweb.com SUMMARY:Programming with Structured Control Language (SCL) Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nLearn about programming with SCL and how you can mix with typical ladder logic in Siemens TIA Portal for S7-1200/1500 PLC’s. The SCL language is very powerful and well suited for complex math operations\, data handling with arrays and string processing. SCL is a high-level text-based language that is easy to understand\, yet provides many benefits over traditional ladder programming. This seminar will provide the foundation for you to start programming in SCL in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/programming-with-structured-control-language-scl-hands-on-7/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240529T083000 DTEND;TZID=America/Chicago:20240530T163000 DTSTAMP:20260406T093243 CREATED:20231129T212054Z LAST-MODIFIED:20240117T173513Z UID:10000275-1716971400-1717086600@www.pccweb.com SUMMARY:Siemens HMI with WinCC Comfort/Advanced DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal WinCC Comfort/Advanced software. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWinCC Comfort/Advanced HMI System Overview\nSiemens HMI Panel Overview\nWinCC flexible Migration to Comfort/Advanced\nProject Creation\nCommunication Setup\nGraphics Design\nLibrary Utilization\nAlarm System\nTag Logging\nRecipe Management\nUser Administration\nVB Scripting\nCross Reference\nMulti-Language Setup\nProject Transfer\nTIA Portal Step 7 Integration\nWinCC Comfort/Advanced Options:\n\nSm@rt Server\nAudit\n\n\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-hmi-with-wincc-comfort-advanced-10/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240514T083000 DTEND;TZID=America/Chicago:20240516T163000 DTSTAMP:20260406T093243 CREATED:20231129T215715Z LAST-MODIFIED:20240117T173835Z UID:10000286-1715675400-1715877000@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-26/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240507T090000 DTEND;TZID=America/Chicago:20240507T120000 DTSTAMP:20260406T093243 CREATED:20231207T220835Z LAST-MODIFIED:20240116T193233Z UID:10000347-1715072400-1715083200@www.pccweb.com SUMMARY:WinCC Unified Test Drive Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis seminar will allow you to take WinCC Unified HMI for a test drive. Explore the features of the new HMI hardware and software in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/wincc-unified-test-drive-hands-on-8/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240416T090000 DTEND;TZID=America/Chicago:20240416T120000 DTSTAMP:20260406T093243 CREATED:20231207T221943Z LAST-MODIFIED:20240116T192924Z UID:10000352-1713258000-1713268800@www.pccweb.com SUMMARY:Introduction to Siemens TIA Portal PLC/HMI first time users Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis Seminar will allow you to take Siemens PLC and HMI for a test drive. Explore the features of the Siemens PLC and HMI in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/introduction-to-siemens-tia-portal-plc-hmi-first-time-users-hands-on-11/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240409T080000 DTEND;TZID=America/Chicago:20240411T163000 DTSTAMP:20260406T093243 CREATED:20231129T220909Z LAST-MODIFIED:20240117T172701Z UID:10000342-1712649600-1712853000@www.pccweb.com SUMMARY:Siemens Step 7 Classic for Maintenance Personnel DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis three day course assumes the student has a very basic understanding of PLCs and will introduce students to the Step 7 software package\, used to program and maintain the S7-300/400 PLC systems. The class focuses on maintaining & troubleshooting the S7 PLC using Step 7. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nCost: $1\,300 \nTopics: \n\nS7 Family Hardware Overview\nS7 Hardware Installation & Maintenance\nRemote I/O Installation & Maintenance\nUsing Simatic Manager\nEditing/Adding Symbols to a Project\nViewing the S7 PLCs Integrated Web Server\nOverview of PROFIBUS & PROFINET Networks\nUsing a Variable Table for Troubleshooting\nOverview of S7 Addressing\nWhy Various Programming Methods Are Used (Linear\, Partitioned\, Structured)\nBasics of Organization Blocks\nBasics of Functions (FC) & Function Blocks (FB)\nBasics of Data Blocks\nMonitoring PLC Program Blocks\nOverview of Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nOverview of IEC Functions & Function Blocks\nWhat Are Libraries Used For\nRewiring a User Program\nComparing Programs\nUsing Cross Reference\, Usage Table & Program Structure Tools\nTroubleshooting a S7 PLC Using LEDs\nTroubleshooting a S7 PLC Using Step 7\nTroubleshooting a S7 PLC Using the Integrated Web Server\nHow to Force a Value\nDocumenting\, Saving & Archiving Projects\n\nPrerequisite: Basic Understanding of PLCs \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-step-7-classic-for-maintenance-personnel-10/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240227T083000 DTEND;TZID=America/Chicago:20240228T163000 DTSTAMP:20260406T093243 CREATED:20231129T212404Z LAST-MODIFIED:20240117T172139Z UID:10000277-1709022600-1709137800@www.pccweb.com SUMMARY:Siemens HMI with WinCC Unified DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis two day course will provide students the skills necessary to develop and maintain applications with the Siemens TIA Portal WinCC Unified software. \nCourse Length & Time: Two days. 8:30 AM – 4:30 PM \nCost: $900 \nTopics: \n\nWinCC Unified HMI System Overview\nSiemens HMI Panel Overview\nProject Creation\nCommunication Setup\nGraphics Design\nLibrary Utilization\nAlarm System\nTag Logging\nRecipe Management\nUser Administration\nScripting\nCross Reference\nMulti-Language Setup\nProject Transfer\nTIA Portal Step 7 Integration\n\nPrerequisite: None \nPart # PCC-TRN-SCH2-WUNI \n \n \n \n \n \n \n \n \n \n \n \n \n \n Attendee Info\n  \n \n \n \n \n \n \n\n\n\n\n \n \n \n \n \n PCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-hmi-with-wincc-unified-6/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240123T083000 DTEND;TZID=America/Chicago:20240125T163000 DTSTAMP:20260406T093243 CREATED:20231129T215229Z LAST-MODIFIED:20240108T231804Z UID:10000283-1705998600-1706200200@www.pccweb.com SUMMARY:Siemens S7-1500 Programming with TIA Portal DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis fast paced three day course assumes the student has a basic knowledge of programming PLCs and focuses on how to use TIA Portal Step 7 Professional software to create a complete PLC system. The focus includes configuration of the Siemens S7-1500 PLC hardware\, PROFINET configuration\, programming using ladder logic and basic diagnostic functions. \nCourse Length & Time: Three days. 8:30 AM – 4:30 PM \nTopics: \n\nS7 Family Hardware Overview\nTIA Portal Project and Portal Views\nConfiguring the S7-1500 PLC Hardware\nConfiguring a PROFINET Network\nS7-1500 Addressing & Memory\nUsing Various Programming Methods (Linear\, Partitioned\, Structured)\nUsing Basic Instruction Set (Contacts\, Coils\, Timers\, Counters)\nHow To Use Function (FC) & Function Block (FB)\nUsing IEC Functions & Function Blocks\nUsing Libraries\nUsing Simatic Automation Tool\nData Block Usage & Data Types\nUnderstanding the Most Used Organization Blocks\nAnalog Value Processing\nMonitoring Logic & Using Watch Tables\nUse of Trace\nOnline Diagnostics & Troubleshooting\nUse of PLCSIM Simulation Tool\nUsing the Integrated Web Server on the PLC\nUsing a Multi-Instance Function Block (Time Permitting)\n\nPrerequisite: Basic Understanding of PLCs\, Successful Completion of Siemens Basics of PLCs Online \n\n \n \n \n \n \n Attendee InfoName*\n \n \n \n First\n \n \n \n \n Last\n \n \n Company*Phone*Email*\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Δ \n \n \n \n \n \n \n \n \n \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/siemens-s7-1500-programming-with-tia-portal-24/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Technical Training ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Chicago:20240117T090000 DTEND;TZID=America/Chicago:20240117T120000 DTSTAMP:20260406T093243 CREATED:20231207T220154Z LAST-MODIFIED:20231215T182656Z UID:10000346-1705482000-1705492800@www.pccweb.com SUMMARY:WinCC Unified Test Drive Hands On DESCRIPTION:Event Information\n  \n \n \n \n \n \n Description\nThis seminar will allow you to take WinCC Unified HMI for a test drive. Explore the features of the new HMI hardware and software in a guided hands-on workshop. \nCourse Length & Time: One Day. 9:00 AM – 12:00 PM \n  \n\n \n \n \n \n \n Attendee InfoName*\n \n \n \n First\n \n \n \n \n Last\n \n \n Company*Phone*Email*\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Δ \n \n \n \n \n \n \n \n \n \nPCC provides technical educational training and events via a structured classroom setting at our local WI training facilities or on-site at your facility. This training is conducted by PCC’s staff of technical engineers or Siemens Certified Trainers and covers all aspects of automation and control. We have training facilities in Eau Claire\, Appleton and Germantown\, Wisconsin.  PCC offers custom educational training in addition to our regularly scheduled courses as well as educational Free TechEd seminars and workshops. URL:https://www.pccweb.com/event/wincc-unified-test-drive-hands-on-7/ LOCATION:PCC – Germantown\, N114 W18770 Clinton Drive\, Germantown\, WI\, 53022\, United States CATEGORIES:Free TechEd ORGANIZER;CN="PCC":MAILTO:training@pccweb.com GEO:43.2263747;-88.1414911 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=PCC – Germantown N114 W18770 Clinton Drive Germantown WI 53022 United States;X-APPLE-RADIUS=500;X-TITLE=N114 W18770 Clinton Drive:geo:-88.1414911,43.2263747 END:VEVENT END:VCALENDAR